The Lompoc Strauss Wind Farm

Santa Barbara Is Well on the Way to 100 Percent Renewable Electricity

A small group of us had the privilege of recently touring the Strauss Wind Energy Project in Lompoc while it is under construction. It is the first and only wind project permitted anywhere along the California coast. From the first earlier permitted version of 65 generators, it has been scaled back to 27 machines, yet with the capacity to produce 100 megawatts of electricity.

Reducing the number of turbines has significant environmental and economic benefits. Major advances in “wind” technology during the past 10-15 years have boosted the output possible for a single generator. Each Strauss platform is rated at 3.8 megawatts, the largest land-based turbine available in the U.S. Blades are 227 feet long, the towers 492 feet tall. Scheduled completion date is December this year. Once operational, project will produce the electricity to power 45 thousand houses. For the next 30 years, it will keep six million metric tons of CO2 from entering the atmosphere and warming the planet. This is the equivalent of not driving 16 billion miles. In addition, it will infuse $40 million into Santa Barbara’s tax coffers.

The next wind project along the California coast will likely be offshore, either in the ocean off Morro Bay or off the coast of Humboldt. Both zones have received federal and state approval and are being readied for bulk permitting. The Biden administration recently approved a Massachusetts plan for the nation’s first commercial-scale offshore wind farm. A dozen other East Coast offshore wind projects are now under federal review. Unlike the East Coast, California faces the logistical challenges posed by a deep ocean floor. Evolving technologies, developed mostly in Europe, now make wind generators on floating platforms feasible, as well as even larger ones than land-based units. There is a wind farm with 6-megawatt turbines operating in the North Sea. There is also a 14-megawatt turbine that has been successfully producing for two years in Rotterdam Port.

Santa Barbara has set a goal of 100 percent renewable electricity by 2030. The adoption of community choice energy programs in the Tri-Counties, an initiative advocated and led by the Community Environmental Council, now has 1.4 million households getting at least 50 percent of their electricity from renewables, and many as much as 100 percent. All will be getting to the 100 percent goal by the end of this decade. The Strauss wind farm, when it comes online, will be a big component of local clean energy production.

Wind energy is an ideal complement to solar energy because winds tend to be strongest in the evening and at night. The distributed photovoltaic panels on buildings throughout the County together with the 40-megawatt Cuyama solar farm and the 100-megawatt Strauss wind farm will produce about two-thirds of the electricity Santa Barbara consumes. The county is well on the way to meeting its 2030 goal.

Floodplain Restoration

In Response to Climate Change, California Is Looking to Nature’s Patterns

Water policy in the Western U.S. has always been a contentious issue. Changes in water management, however, are slowly happening. For example, an increasing number of dams are being deconstructed where environmental, safety, and Indigenous-cultural impacts outweigh the benefits of hydropower, flood control, irrigation, or recreation. Dams across the U.S. have an average age of more than half a century, and many pose a growing safety risk. Power production from dams is becoming less economically viable as costs of solar- and wind-generated electricity fall. 

More recently, the issues of water wastage and flood control from dam removal are being offset by allowing rivers to return to more natural flow patterns. Floodplain restoration is occurring along the Mississippi River and in Washington State, but California is rethinking how rivers flow even more broadly and leads with an additional emphasis on ecological health as climate change alters the environment. Carefully selected types of woody trees and shrubs are being planted in restored floodplains to enhance wildlife habitat and attract native species. 

California’s largest floodplain restoration project, the 2,100-acre Dos Rios Ranch Preserve in the Central Valley (at the confluence of the Tuolumne and San Joaquin rivers), is removing levees so that when heavy rains occur, the rivers can overflow their banks and revert to their historic floodplains.

The state is prioritizing these types of projects to lower risks to homes and property while boosting wildlife habitat, improving water quality, and potentially recharging groundwater supplies. As climate change leads to higher temperatures, mountain snowpack that typically trickles into the watershed will likely increase river flows and flooding. The growing risk to cities like Sacramento and Stockton, both built in floodplains, is alarming experts. Not only are California’s dry periods getting drier, but scientists are expecting wet periods to get wetter.

The update to the Central Valley Flood Protection Plan, just being released, puts a premium on floodplain restoration to reduce risk to 1.3 million people who live in floodplains. Unlike in the contentious world of most California water policy, there is wide agreement on the value of restoring floodplains, which can also reduce one concern attached to dam removal projects. There is good funding news: The Biden infrastructure bill earmarks $1.75 billion for projects designed to reduce flood risk.

California officials initiated Central Valley flood planning only a decade ago, but in this short time have established the state as a leader, if not the leader. Since the 1850s, 95 percent of Central Valley wetlands and river habitats have been lost. Restoring all of that will be impossible, but the state is starting to reclaim some of these losses.

Save Water and Grow More Food

The factor that has shaped human civilization more than any other is water. The extreme weather patterns due to climate change are increasing drought in some regions and extreme storms and floods in others. In California and the West, we are experiencing more intense drought. Given this shift, irrigation practices are key to achieving optimal water efficiency on farms and in urban landscapes. Drip irrigation has been widely adopted the past few decades. More recently, a new irrigation technology called GrowStream, designed to communicate directly with plants, is starting to be deployed.

This plant-responsive irrigation system is based on an understanding of plant physiology and organic chemistry. The groundbreaking research by Suzanne Simard over the past three decades reveals the complex, interdependent underground mycorrhizal networks of forest trees and how they communicate, learn, and share. Her work is the foundation for this “smart” irrigation system. The genius of this system is subsurface tubing infused with a pore-filled polymer that can sense a plant’s needs. When a plant gets thirsty, it releases a special chemical into the surrounding soil. The microporous tubing is poised to respond to these chemicals with the slow release of water and nutrients through its millions of micropores at a rate to match the roots’ absorption capacity. When the plant’s water craving is quenched, it stops emitting the thirst chemical, and the micropores close.

Since the system is responding “real-time” to the plant’s signals, it can answer to the plant’s reaction to temperature and wind variations. Because the system is in sync with the plant’s requirements, there is less stress on the plant, resulting in more growth and higher yields. The tubing lines can run 1,200 feet, and since the tubing communicates directly with each individual plant, one line can support a variety of plant types. 

The system is easy to install and maintain; costs the same or less than other subsurface irrigation technologies; requires no sensors, valves, controllers, timers, or other electronic devices; and has no emitters to get clogged. A small machine is able to trench, roll out the tubing, and backfill in one pass. Most importantly, the efficient application of water reduces the amount needed by 30-50 percent over drip systems. Similarly, the ultra-low pressure and flow rates dramatically reduce pumping demands, yielding 40-70 percent savings on energy. 

The GrowStream system is being used in 14 countries, some in the Middle East and some in Africa. In the U.S., it is being tested on urban landscaping with the goal of increasing green cover and countering the heat-island effect. All considered, it has the potential to greatly reduce water scarcity and improve food security. The biggest hurdle will be getting farmers to change from existing methods of irrigation that are already established and paid for.

Lighting is Key to our Wellbeing

Natural and artificial lighting in our living and working spaces is critical to our wellbeing. Natural lighting normally comes into our structures through windows and skylights. Locating these openings on two adjoining or opposite walls of a room, or on a ceiling and wall produces the most effective and comfortable lighting. If remodeling or building from the ground up, it is wise to pay attention to this strategy when locating windows and skylights. Apartment dwellers have fewer options but shouldn’t automatically close drapes or blinds during the day for reasons of privacy.

We want artificial lighting to do many things: create ambiance, avoid glare, provide good task illumination, be efficient and gentle on our electrical bills, and when provided by wall or ceiling mounted fixtures, be attractive. For these reasons, it is advisable to work with a lighting consultant on remodeling and new construction projects. Unfortunately, there are not many “experts” that have combined experience in and knowledge of efficiency, effectiveness and aesthetics.

There have been big changes in lighting technology in the past several decades. LEDs (light emitting diodes) are now available with great longevity, low power usage and a wide range of color hues, even matching the beloved color rendering of incandescent lamps. Today, most LEDs are made in China. Quality can be uneven, however, as corners are sometimes cut in the push to drive down prices. Quality is always important, but especially if a bulb is to last for its advertised life expectancy.

When selecting an LED bulb, the best advice is to learn to read and understand the “Lighting Facts” label on the packaging. The two most important specifications to review are the following:

Color Rendering Index (CRI): Look for a CRI of 90 or higher. While 80 is more commonly available, this rating is linked to uneven quality and harshness of color.

Correlated Color Temperature (CCT): Most residential customers prefer 2,700K, which most closely emulates incandescent coloring. You may encounter 4,000K and 5,000K LEDs advertised as “daylight”. This may sound appealing, but most users find LEDs in this “whiter end” of the color spectrum too stark for residential use.

If an LED bulb does not have a “Lighting Facts” label, that should be a warning of a product to avoid. The Energy Star stamp, on the other hand, indicates quality.

Most, but not all LED bulbs are dimmable. If dimming is desired, be sure to check for a “dimmable” symbol on the packaging.

Lighting contributes greatly to how we feel in an indoor space. Choosing the best products is important, especially as one ages and the eyes need more lumens to perform tasks well. LEDs have taken over artificial lighting in the past decade and for good reason, but there are pitfalls to be avoided. The compatibility between switches, transformers, fixtures and bulbs is complex so working with qualified professionals helps with peace of mind.